Bagger Fender Spacers
These trick little spacer blocks make the install of our new fenders simple and easy. They feature Domino styling on one side and smooth styling on the other so you can choose your styling preference. Available in chrome plate, black powder coat with accent cuts or satin finishes.
Part# - BFS-C / Front Fender Spacers Chrome / Price: $89.95
Part# - BFS-S / Front Fender Spacers Satin Finish / Price: $76.00
Part# - BFS-B / Front Fender Spacers Black Powder Coat / Price: $86.00
21", 23" and 26" DEI Fender - New Shape
This classic sport styled front fender was originally designed for the late racing legend Dale Earnhardt. Now Paul has completely restyled this classic fender to totally compliment 21"-26" wheel conversions. He's lengthened both front and rear and thickened the sidewalls. Deep drawn from 12 gauge steel (bullet proof and the strongest available) (21" only)... they
are made from one indestructible piece!! 23" & 26" are made from 2 pieces. Each fender is shipped raw and not drilled so you can slam it as close to your tire as you dare. Additional fender spacing is required which are on the previous page.
Part# - FF-10 / DEI Front Fender 21" / Price: $299.00
Part# - DEI-23 / DEI Front Fender 23" / Price: $499.00
Part# - DEI-26 / DEI Front Fender 26" / Price: $575.00
Thicky 21", 23" and 26" Fender
This classic west coast styled front fender has been a best seller for years. Now Paul has completely restyled this classic fender to totally compliment
21", 23" and 26" wheel conversions. He lengthened both front and rear, squared the ends and thickened the sidewalls. Deep drawn from 12 gauge steel (bullet proof and the strongest available) (21 only)... they are made from one indestructible piece!! The 23"and 26" fenders are made from two pieces. Each fender is shipped raw and not drilled so you can slam it as close to your tire as you dare. Additional fender spacing is required. 23" fender also available in super light weight composite. This fender requires the use of our Fender Spacers available in black w/ accent cut, satin or chrome finishes
Part# FFT-21 / Thicky Front Fender 21" / Price: $299.00
Part # FFT-23 / Thicky Front Fender 23" / Price: $499.00
Part # FFT-26 / Thicky Front Fender 26" / Price: $575.00
Part # FFT-23C / Composite Thicky Front Fender 23" / Price: $389.95
Classic Stretched 21", 23" and 26" Fender
Adding a bigger front wheel to your Bagger is all the rage! Paul loves the way a bigger wheel looks on a bagger so much that he's created a line of
products just for this conversion. This super high quality high pressure formed composite fender is styled in a classic Bagger fashion with a nice 4" stretch on the tail for that slammed hot rod look. Check out the perfect 90 degree angle between the top and rear fender edges...Perfect symmetry will set your bike apart from the pack and allow the eye to flow seamlessly across your custom. Each fender is 3-D molded and hand finished so there's no need for additional mounting blocks. We've handled all that! New for this year we've created a version of our Classic Stretched Fender for 26" wheel conversions as well! Same awesome quality, no need for additional spacers, slammed with a 4"stretch just like the 21" and 23" version.
Part # FFC-21 / Touring models 1986 to present / Price: $494.95
Part # FFC-23 / Touring models 1986 to present / Price: $494.95
Part # FFC-26 / Touring models 1986 to present / Price: $529.95
Big Bag Stretched Bags
These are the highest quality aftermarket saddlebags I have ever seen! No expense has been spared creating these beautiful aerospace quality bags. They are the perfect stretch amount, (not to long, so you won't drag them in the turns) they have a gorgeous scallop treatment on the side of the bag which is great for paint accents and adds an incredible wall strength to the bags. The stretch is full, all the way down so you'll pick up some extra bag capacity and the walls are double thick... no cracking here! They are pressure formed resin transfer and then baked at 300 degrees so the shape you get is the shape the bags will keep! No more warping bags from heat exposure. They are finished inside and out, (you won't believe your eyes) they are pre-drilled so your existing latches and lids will bolt right on! These are truly the nicest quality, best looking bags I've worked with and I wouldn't put anything else on my ride.
They are available in 3 exhaust outlet choices: Dual Outlets / Single Right Side Outlet / No Exhaust Outlets...
We have custom Chupa Rear Fenders to match any style you choose! Shipped primered and paint ready.
Part# - BBDO / Dual Exhaust Outlets / Price: $1299.95
Part# - BBRO / Single Right Side Outlet / Price: $1399.95
Part# - BBNO / No Exhaust Outlets / Price: $1499.95
(Fits 1993 and later touring models with side latches)
Dresser Dash For Custom Builders
This is the original raw extra long dash that Paul originally offered for all custom applications. It can be used for a multitude of custom installs including extra long stretched tanks & super sleek Road King installs. Fabrication, modification & possibly frustration required!
Sold Separately: Install Hardware Kit, Pop-Up Gas Cap, Rubber Trim
Part# - DD-FI-B / Dresser Dash Raw - 5 Gallon Apps. / Price: $221.95
Part# - DHK / Install Hardware Kit / Price: $78.00
Part# - PUGC / Pop-Up Gas Cap / Price: $39.95
Part # - RDT / Rubber Dash Trim / Price: $9.95